How do I install a throttle grip on my pit bike?

Dec 16, 2025

Leave a message

Hey there, fellow pit bike enthusiasts! I'm a supplier of pit bikes, and I know how important it is to keep your ride in top - notch condition. One of the simple yet crucial upgrades you can make to your pit bike is installing a new throttle grip. In this blog, I'll walk you through the process step - by - step.

First things first, let's talk about why you might want to install a new throttle grip. Over time, the old grip can wear out, get slippery, or just not feel as comfortable as it used to. A fresh throttle grip can improve your control over the bike, giving you a better riding experience. And if you're into racing or just love to push your pit bike to the limits, a good throttle grip is a must - have.

Now, before we start the installation, you'll need a few tools. You'll need a flat - head screwdriver, some rubbing alcohol, a clean cloth, and of course, your new throttle grip. Make sure the new grip is the right size for your pit bike. You can usually find the correct size in the bike's manual or by checking with the manufacturer.

The first step is to remove the old throttle grip. Start by using the flat - head screwdriver to gently pry off the rubber end cap on the throttle side of the handlebar. This cap is usually held in place by friction, so be careful not to break it. Once the end cap is off, you'll see a small screw. Loosen this screw with the screwdriver. This screw is what holds the throttle tube in place.

After loosening the screw, you can start to slide the old throttle grip off the handlebar. Sometimes, the grip can be a bit stubborn, especially if it's been on there for a long time. If that's the case, you can use a little bit of rubbing alcohol on a clean cloth to lubricate the inside of the grip. This will make it easier to slide off. Just be careful not to get the alcohol on any painted parts of the bike, as it can damage the paint.

Once the old grip is off, take a good look at the handlebar. Make sure there's no dirt, grime, or old adhesive left on it. Use the clean cloth with a bit more rubbing alcohol to clean the handlebar thoroughly. This will ensure that the new grip adheres properly.

Now, it's time to install the new throttle grip. Start by putting a small amount of rubbing alcohol on the inside of the new grip. This will act as a temporary lubricant, making it easier to slide the grip onto the handlebar. Align the grip with the throttle tube and start to slide it on. Make sure it's centered and straight.

As you're sliding the grip on, you might notice that it's a bit tight. That's a good thing! A tight fit means the grip will stay in place while you're riding. Once the grip is almost all the way on, you can start to adjust the throttle tube. Make sure the throttle moves smoothly and freely. If it feels too tight or too loose, you can make adjustments by moving the throttle tube slightly.

After the grip is fully on and the throttle is working properly, tighten the screw on the throttle tube. Make sure it's tight enough to hold the tube in place, but don't over - tighten it, as you could damage the tube or the handlebar.

Finally, put the rubber end cap back on the handlebar. Press it firmly until it snaps into place.

And there you have it! You've successfully installed a new throttle grip on your pit bike. It's a relatively simple process that can make a big difference in your riding experience.

R-LD2 300cc Enduro MotorcycleR-LD5 Single Cylinder Off Road Motorcycle best

Now, if you're in the market for a new pit bike or need some replacement parts, we've got you covered. We offer a wide range of high - quality pit bikes, including the 150cc Cg Single - cylinder Air - cooled 4 - stroke Motorcycle, the R - ld5 Single Cylinder Off Road Motorcycle, and the R - ld2 300cc Enduro Motorcycle. Our bikes are built to last and offer great performance on and off the track.

If you're interested in purchasing any of our pit bikes or parts, don't hesitate to reach out. We're always happy to answer any questions you might have and help you find the perfect bike or part for your needs. Whether you're a beginner or a seasoned pro, we've got something for everyone.

So, what are you waiting for? Upgrade your pit bike today and get ready for an even more thrilling ride!

References:

  • Pit Bike Manuals
  • Manufacturer's Guidelines for Throttle Grip Installation